生產設施
Inside the Vladivostok mill
A single integrated hardwood facility on the Sea of Japan — sawmill, dry kilns, glue-jointing, planing and quality control under one roof. FSC-certified, staffed year-round.
年闊葉硬木進料量
~50,000 m³/yr
乾燥窯容量
220 m³
營運年資
12
在崗人數
42
The pitch, in one paragraph
We control every step from log to loaded container: sawmill, kilns, glue press, planing, sanding, quality control and packing — all in one facility 40 km from the Vladivostok commercial port. That means shorter lead times, no third-party middlemen, and complete traceability from finished panel back to the FSC forest lot.
On the production floor
Inside the sawmill, where every log is broken down before it moves on to the kilns and glue-press line.
Full facility tour, capacity numbers and equipment list expanding through Phase 3.
生產階段
Sawmill & log yard
Logs arrive graded and metered from FSC-certified concessions in Primorsky Krai. Butt-end scanning + optimized break-down cutting keep yield above 45% on lamella stock.
生產階段
Dry kilns
Two 110 m³ dehumidification kilns run continuous schedules for oak and ash lamella. Target moisture 8 ± 2%, verified with pin meters on every pack before it leaves the kiln room.
生產階段
Glue press & jointing line
Finger-jointing on end-grain and edge-glue press on wide panels. PVA D3/D4 for interior grades; MUF (melamine-urea-formaldehyde) available for humid-service or export-grade panels.
生產階段
Planing & sanding
Two 4-side moulders for T&G, facade cladding and skirting profiles. Wide-belt sanding to 120/150/180 grit depending on the finish specification.
生產階段
Quality control
Every panel is inspected against grade rules (A/A, A/B, B/B, Rustic), moisture-metered a second time, dimensionally checked, and packed for the ordered destination market. Photos of production go with every RFQ we accept.
工廠照片
認證
- FSC Chain of Custody
- Phytosanitary certificate (Rosselkhoznadzor)
- ISPM-15 heat-treated packaging